RESIDENTIAL PRODUCTS
- Replacement Filters
- Air Cleaners
- Thermostats
- Humidifiers
- Dehumidifiers
- Ventilators
- Carbon Monoxide Alarm
- Water Filters
- Honeywell Zone Controls
COMMERCIAL PRODUCTS
Conventional Zoning Kit EMM-3UK
Part No. EMM-3UK
Our Price: $170.21 SALE
Features
Specifications
Literature
EMM-3U Universal Electronic MiniZone Panel (2H/2C)
Controls single-stage, multi-stage, conventional or heat pump heat/cool equipment and is used on two- and three-zone applications.
Compatible with single-stage, multi-stage, conventional or heat pump applications.
Uses virtually any Honeywell four-wire, single-stage, multi-stage, or Trol-A-Temp heat pump thermostat.
Optional ZoneMax Sensor or C7735A1000 Discharge Air Temperature Sensor for capacity control.
System and Zone LEDs indicate system status.
Automatic zone changeover with 20-minute changeover timer.
Individual zone fan control.
Thermal circuit breaker protects panel and transformer from damage if miswired.
Purge timer protects equipment between calls for heating and cooling.
Uses spring-open/power-closed, spring-closed/power-open, and power-open/power-closed dampers.
Interfaces with single or dual transformer equipment.
Replaces MABSEZ Series.
C7735A1000 Discharge Air Temperature Sensor
A duct-mounted temperature probe used to provide capacity control of the heating and cooling equipment.
Used only with Honeywell zoning solutions including TZ-3, MABS EZ-2 and -4, and EMM-3 and EMM-3U control panels.
Mounts in the supply air duct to sense the delivered air temperature and cut off the heating or cooling when the delivered air temperature goes above or below normal operating limits.
Requires only two wires.
Uses normal 18 to 22 gauge thermostat wire for shorter runs.
Uses shielded cable for longer runs or when wiring near line voltage.
Replaces ZoneMAX Sensor.
Controls single-stage, multi-stage, conventional or heat pump heat/cool equipment and is used on two- and three-zone applications.
Compatible with single-stage, multi-stage, conventional or heat pump applications.
Uses virtually any Honeywell four-wire, single-stage, multi-stage, or Trol-A-Temp heat pump thermostat.
Optional ZoneMax Sensor or C7735A1000 Discharge Air Temperature Sensor for capacity control.
System and Zone LEDs indicate system status.
Automatic zone changeover with 20-minute changeover timer.
Individual zone fan control.
Thermal circuit breaker protects panel and transformer from damage if miswired.
Purge timer protects equipment between calls for heating and cooling.
Uses spring-open/power-closed, spring-closed/power-open, and power-open/power-closed dampers.
Interfaces with single or dual transformer equipment.
Replaces MABSEZ Series.
C7735A1000 Discharge Air Temperature Sensor
A duct-mounted temperature probe used to provide capacity control of the heating and cooling equipment.
Used only with Honeywell zoning solutions including TZ-3, MABS EZ-2 and -4, and EMM-3 and EMM-3U control panels.
Mounts in the supply air duct to sense the delivered air temperature and cut off the heating or cooling when the delivered air temperature goes above or below normal operating limits.
Requires only two wires.
Uses normal 18 to 22 gauge thermostat wire for shorter runs.
Uses shielded cable for longer runs or when wiring near line voltage.
Replaces ZoneMAX Sensor.
Replacement Filter Program
Featured Products
